Penn International Single Speed Reels
Product Description
Built proud in Philadelphia, the International V reels are precision machined from high-strength, lightweight, aircraft grade aluminum, not weak plastic parts that may flex under heavy drags or intense heat. The two speed design allows for quick adjustment into high or low gear.
Dura-Drag™
The Dura-Drag system results in a smoother start up and virtually eliminates hesitation, even under extreme drag settings. Consistent drag performance is arguably the most important feature required during long battles. In the lab, the competition’s drag force varied by almost 30% where the Dura-Drag system maintained the same level of drag pressure throughout without fluctuation.
Made in the USA
The International VS is built in our Philadelphia, Pennsylvania manufacturing center. Our experienced crew has been designing and producing durable, high-quality reels in this facility since 1932.
Quick-Shift™
Quick-Shift 2-speed system shifts into high or low gear allowing you to easily adjust to any fishing situation on the fly.
Push-to-Turn™
The Push-to-Turn preset drag knob eliminates accidental changes to the drag and prevents lost fish due to pulled hooks or slack in your line.
Ultimate Adjustable Clicker
The ultimate adjustable clicker on the 12V allows for the greatest range of bait clicker settings in the industry. Simply turn the dial clockwise to increase the tension for fishing bigger baits or turn it counterclockwise to lighten the tension for smaller baits or to detect lighter strikes. (Available in 12VS only)
Full Metal Body
Constructed with a full metal body and side plates to keep precise gear alignment under heavy loads
Features
. Full metal body and sideplates keep precise gear alignment under heavy loads
. Push-To-Turn™ preset knob eliminates accidental changes to the drag
. Ratcheted drag lever prevents “drag creep” caused by hours of trolling and vibrations
. Ultimate adjustable clicker available on 12 size only
12V
Mono Cap. (yds/lb) 875/12 • 775/15 • 525/20
Braid Cap. (yds/lb) 1425/20 • 1075/30 • 750/50
Bearings 4
Max Drag @Strike / @Full 9lbs. / 13lbs
Gear Ratio 5.9:1
Line Retrieve 45(in) Weight 31(oz)
30VW
Mono Cap. (yds/lb) 900/30 • 550/50 • 480/60
Braid Cap. (yds/lb) 1525/65 • 1325/80 • 1125/100
Bearings 4
Max Drag @Strike / @Full 23lbs. / 30lbs
Gear Ratio 3.8:1
Line Retrieve 37(in) Weight 57(oz)
50VW
Mono Cap. (yds/lb) 825/50 • 725/60 • 525/80
Braid Cap. (yds/lb) 2000/80 • 1700/100 • 1425/130
Bearings 4
Max Drag @Strike / @Full 28 lbs. / 45lbs
Gear Ratio 3.1:1
Line Retrieve 34(in) Weight 74(oz)
Dura-Drag™
The Dura-Drag system results in a smoother start up and virtually eliminates hesitation, even under extreme drag settings. Consistent drag performance is arguably the most important feature required during long battles. In the lab, the competition’s drag force varied by almost 30% where the Dura-Drag system maintained the same level of drag pressure throughout without fluctuation.
Made in the USA
The International VS is built in our Philadelphia, Pennsylvania manufacturing center. Our experienced crew has been designing and producing durable, high-quality reels in this facility since 1932.
Quick-Shift™
Quick-Shift 2-speed system shifts into high or low gear allowing you to easily adjust to any fishing situation on the fly.
Push-to-Turn™
The Push-to-Turn preset drag knob eliminates accidental changes to the drag and prevents lost fish due to pulled hooks or slack in your line.
Ultimate Adjustable Clicker
The ultimate adjustable clicker on the 12V allows for the greatest range of bait clicker settings in the industry. Simply turn the dial clockwise to increase the tension for fishing bigger baits or turn it counterclockwise to lighten the tension for smaller baits or to detect lighter strikes. (Available in 12VS only)
Full Metal Body
Constructed with a full metal body and side plates to keep precise gear alignment under heavy loads
Features
. Full metal body and sideplates keep precise gear alignment under heavy loads
. Push-To-Turn™ preset knob eliminates accidental changes to the drag
. Ratcheted drag lever prevents “drag creep” caused by hours of trolling and vibrations
. Ultimate adjustable clicker available on 12 size only
12V
Mono Cap. (yds/lb) 875/12 • 775/15 • 525/20
Braid Cap. (yds/lb) 1425/20 • 1075/30 • 750/50
Bearings 4
Max Drag @Strike / @Full 9lbs. / 13lbs
Gear Ratio 5.9:1
Line Retrieve 45(in) Weight 31(oz)
30VW
Mono Cap. (yds/lb) 900/30 • 550/50 • 480/60
Braid Cap. (yds/lb) 1525/65 • 1325/80 • 1125/100
Bearings 4
Max Drag @Strike / @Full 23lbs. / 30lbs
Gear Ratio 3.8:1
Line Retrieve 37(in) Weight 57(oz)
50VW
Mono Cap. (yds/lb) 825/50 • 725/60 • 525/80
Braid Cap. (yds/lb) 2000/80 • 1700/100 • 1425/130
Bearings 4
Max Drag @Strike / @Full 28 lbs. / 45lbs
Gear Ratio 3.1:1
Line Retrieve 34(in) Weight 74(oz)